Bright Zinc Galvanising Aerosol Spray Paint | 4 x 500ml

1. What is JENOLITE Bright Zinc Galvanising Spray Paint used for?

This spray paint is designed to quickly touch up and protect galvanised metal surfaces, including newly galvanised steel, welding joints, and cut ends. It provides both rust protection and a professional finish in one easy application.

2. Can it be used as both primer and topcoat?

Yes. The all-in-one formula acts as both a primer and topcoat, saving time and eliminating the need for separate products.

3. How does it protect against rust?

The paint has a high zinc content, which provides superior protection against rust and corrosion, particularly on cut edges, welding points, and galvanised structures.

4. What finish does it provide?

It leaves a bright zinc finish that is an accurate colour match for newly galvanised steel, ensuring a seamless touch-up and professional look.

5. How fast does it dry?

• Touch dry: 15–30 minutes between coats
• Fully cured: 24 hours before handling or overcoating

6. How do I prepare the surface before spraying?

1. Remove all traces of oil, grease, loose rust, and old paint using a degreaser, wire brush, or steel wool.
2. Ensure the surface is clean and dry before spraying.

7. How do I apply the spray paint?

1. Shake the can thoroughly until the agitator moves freely.
2. Hold upright and spray evenly from 25–30cm away.
3. Apply multiple thin coats for best results, allowing 15–30 minutes between coats.
4. For final finishing coats, allow at least 24 hours to dry fully.

8. Is it suitable for DIY use?

Yes. The aerosol format allows for precise and convenient application, making it perfect for both DIY enthusiasts and professionals.

9. How should I store the product?

• Store in a cool, well-ventilated place, out of direct sunlight.
• After use, invert the can and spray for 2 seconds to prevent nozzle blockages.
• Consult the Safety Data Sheet for additional handling information.

10. Where is it made?

Made in Britain, ensuring high-quality performance, durability, and rust protection.

1. Shake well before use
Shake the can thoroughly until the agitator moves freely. Hold upright, and spray evenly onto the surface from a distance of 25 to 30cm. Allow to dry for between 15 and 30 minutes when subsequent coats are to be applied. When applying finishing coats, allow at least 24 hours to dry thoroughly prior to application.

2. Storage & Reuse
To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult Safety Data Sheet for more information.