Hollow Section Cavity Wax Aerosol, 500ml Spray with 600mm Extension Straw & Nozzle

1. What is JENOLITE Hollow Section Cavity Wax?

It is a rust-preventative aerosol designed for protecting hard-to-reach hollow sections of vehicles. It actively kills existing rust while forming a durable protective barrier against future corrosion.

2. Which areas is it suitable for?

• Car doors
• Panels
• Box sections
• Any hollow or difficult-to-reach areas in vehicles
  

3. How does it work?

• The formulation acts as a self-sealing rust killer, eliminating existing rust.
  
• Creates a flexible, weatherproof membrane that protects against future rust formation.
  

4. What materials and conditions is it resistant to?

The cavity wax is resistant to:

• Weather and moisture
  
• Salt
  
• Water
  
• Weak acids and bases
  

5. What makes application easier?

• Comes with a 600mm extension straw and nozzle, allowing precise application even in hard-to-reach hollow areas.
  
• Multi-directional nozzle ensures complete coverage.
  

6. How do I prepare before use?

• Ensure the aerosol is at room temperature (10°C to 25°C).
  
• Shake the can well for approximately 2 minutes before application.
  

7. How should I apply the cavity wax?

• Apply generously in the hollow areas.
  
• Use the supplied straw and nozzle to reach difficult spots.
  
• Ensure full coverage for maximum protection.
  

8. How should I store and maintain the spray can?

• After use, clean the nozzle and straw by turning the aerosol upside down and pressing the nozzle for 5 seconds.
  
• Store in a cool, dry place, away from direct sunlight.
  

9. Is it safe to use?

Follow the Safety Data Sheet (SDS) for proper handling. Use in a well-ventilated area and avoid direct contact with skin or eyes.

10. What projects is it ideal for?

• Automotive rust protection and maintenance
  
• Preserving structural integrity of vehicle hollow sections
  
• Preventative care for doors, panels, and box sections

1. Before Use
Ensure the aerosol is at room temperature before use (10°C to 25°C). Shake well, for approximately 2 minutes.

2. Application
Apply the wax generously in the hollow areas, use the supplied straw adaptor and nozzle to reach into difficult to reach areas.

3. Storage & Reuse
After use, clean the nozzle and straw by turning the aerosol upside down and pressing the nozzle for approximately 5 seconds. Store in cool dry area, out of direct sunlight. Consult Safety Data Sheet for more information.