Belt Slip Adhesive Spray | 400ml | Anti-Slip Solution for Belts & Pulley

£13.99

Fully secure checkout
Trusted by thousands
Rated and reviewed

Want next day delivery? Be quick!

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Sorry, it's out of stock.

But we can let you know when it's back in.

Question about this product?

We're happy to help.

Shop safely

Secure your shopping experience with various safe and trusted payment methods.

Shop safely with us

Sold out

ANTI-SLIP SOLUTION FOR BELTS & PULLEYS: JENOLITE Belt Slip, Adhesive Spray has been specially developed to reduce slippage and increase the efficiency of belt driven machinery. Ideal for automotive, industrial, and machinery applications.
PERFECT FOR: Designed for use on fan belts, drive belts, and conveyor systems, the non-slip formula helps increase torque and power by reducing belt slippage.
INCREASE EFFICIENCY: As well as increasing efficiency it can help reduce wear and tear of belts, extending belt life, and also reduces belt squeal and noise.
SUITABLE FOR USE WITH: Flat, 'V', round, rubber, leather and fabric belts.
MADE IN BRITAIN

FAQs

1. What is Belt Slip Adhesive Spray used for?

Belt Slip Adhesive Spray is designed to prevent slipping on fan belts, drive belts, and conveyor belts by enhancing grip and traction. It helps improve efficiency, reduces wear, and extends the life of the belt.

2. How does this spray work?

It creates a tacky, non-slip surface on the belt, increasing friction between the belt and pulley. This helps maintain consistent power transfer and prevents loss of efficiency due to slipping.

3. What types of belts can it be used on?

This spray is suitable for:

Automotive drive belts (fan belts, alternator belts, etc.)

Industrial machinery belts

Agricultural equipment belts

Conveyor belts

Power transmission belts

4. How do I apply Belt Slip Adhesive Spray?

Ensure the belt is clean and dry.

Shake the can well before use.

Spray evenly onto the inner (contact) surface of the belt.

Let it set for a few minutes before operating the equipment.

5. How often should I reapply the spray?

Reapplication depends on usage and operating conditions. In high-friction environments, regular application may be needed to maintain optimal performance.

6. Is it safe for all belt materials?

Yes, it is safe for most rubber, leather, and synthetic belts. However, avoid excessive application, as it may cause buildup over time. Always check the manufacturer’s recommendations before use.

7. Can this spray be used as a lubricant?

No, this product is designed to enhance grip, not to lubricate. If you need a belt lubricant, use a product specifically formulated for that purpose.

8. Does this spray attract dust or dirt?

Unlike some adhesives, this spray is formulated to minimise dust accumulation while maintaining grip. However, regular belt maintenance is still recommended.

9. Can it be used on wet or damp belts?

For best results, apply the spray to a clean, dry belt. Moisture may reduce its effectiveness.

10. Will this damage the belt over time?

No, when used correctly, it helps extend belt life by reducing slippage and wear. However, excessive application may cause buildup, so use only as needed.

How To Use

1. Apply directly to a cool surface
Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.

2. For the best results
Ensure you test a small area of the belt first and apply a thin film directly to the drive face of the belt.

3. Storage & Reuse
To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult Safety Data Sheet for more information.