Cast Effect Spray Paint | Iron or Bronze Finish | Multi Surface Spray Paint

1. What is JENOLITE Cast Effect Spray Paint?

JENOLITE Cast Effect Spray Paint is a multi-surface aerosol paint designed to recreate the look and feel of real cast iron or bronze. It produces a lightly textured, matte finish that mimics authentic metal surfaces and is suitable for both interior and exterior use.

2. What are the key benefits?

• Realistic cast metal effect: Creates the appearance of genuine cast iron or bronze.
• Textured finish: Lightly textured matte finish for authenticity.
• Durable & weather-resistant: Long-lasting, UV and weather-resistant finish suitable for outdoor use.
• Versatile surfaces: Works on wood, metal, plastic, ceramic, terracotta, cast concrete, and more.
• Quick drying & easy to apply: Suitable for both DIY and professional projects.
• Made in Great Britain: High-quality, trusted formulation.
  

3. What surfaces can it be used on?

• Wood
• Metal
• Plastic
• Ceramic
• Terracotta
• Cast concrete
• Garden furniture, railings, ornaments, and decorative features
  

4. How do I prepare the surface?

1. Ensure the surface is clean, dry, and free from dust, grease, and oils.
2. Remove loose paint or corrosion using a stiff brush or suitable abrasive paper.
3. Degrease the surface if necessary.

5. How do I apply the spray?

1. Shake the can well until the agitator ball rattles.
2. Spray from 15–30 cm in smooth, even strokes.
3. Apply thin coats, allowing 15 minutes drying time between each layer.
4. Repeat 2–3 coats for a fully textured and durable finish.

6. Can it be used outdoors?

Yes. The paint is weatherproof and UV-resistant, making it suitable for exterior projects like garden furniture, railings, and decorative ornaments.

7. How long does it take to dry?

• Between coats: 15 minutes
• Full cure: Depends on environmental conditions; allow adequate drying before handling or exposing to the elements.

8. How should I store the aerosol?

• Store in a cool, well-ventilated place, away from direct sunlight or heat sources.
• After use, invert the can and spray for 2 seconds to prevent nozzle blockage.
• Keep out of reach of children.

9. What common mistakes should I avoid?

• Applying thick coats — use multiple thin layers for a realistic textured effect.
• Spraying on dirty or greasy surfaces — clean thoroughly first.
• Not allowing adequate drying time between coats — can affect texture and adhesion.
• Ignoring nozzle clearing after use — may block the spray.

Prepare the area to be treated, ensuring freedom from dust, grime, greases, oils etc, using an appropriate degreaser. other surface contamination, and loosely adhering matter should be removed using a stiff brush or an appropriate grade of wet and dry abrasive paper.

1. Apply directly to a cool surface
Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.

2. Allow time to dry between coats
Repeat the process 2-3 times for the maximum protection, allowing 15 minutes drying time between each coat.

3. Storage & Reuse
To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult Safety Data Sheet for more information.