Machinery & Lawnmower Spray Paint 400ml, Atco Green, Battleship Grey

1. What is JENOLITE Machinery & Lawnmower Spray Paint?

JENOLITE Machinery & Lawnmower Spray Paint is a high-quality aerosol paint formulated to provide a hard-wearing, durable finish for machinery, lawnmowers, and other metal or plastic surfaces. It is colour-matched to industry standards for professional results.

2. What are the key benefits?

• Extremely hard-wearing: Durable finish designed to withstand tough conditions.
• Corrosion and rust resistant: Protects metal surfaces against rust, chipping, and fading.
• Colour-matched to industry standards: Ensures professional, accurate finishes.
• Restores and protects: Ideal for machinery, lawnmowers, and industrial equipment.
• Quick-drying: Reduces downtime and speeds up project completion.
• Made in Britain: Manufactured to high-quality standards.
  

3. What surfaces can it be used on?

• Metal and steel machinery
• Lawn mowers and garden equipment
• Plastics and industrial equipment
• Primed or bare surfaces for best results
  

4. How do I prepare the surface?

1. Remove oil, grease, and dirt from the surface.
2. Remove loose paint or rust using steel wool or a wire brush.
3. Ensure the surface is cool and dry before application.
4. Priming the surface beforehand is recommended for optimal adhesion and durability.
   

5. How do I apply the spray?

1. Shake the can well until the agitator ball rattles.
2. Spray from 15–30 cm away in smooth, even strokes.
3. Apply thin, light coats, allowing drying time between layers for a smooth, durable finish.
   

6. What colours are available?

• JCB Yellow
• Atco Green
• Battleship Grey
• Graphite Grey

7. Can it be used outdoors?

Yes. The paint is weather-resistant, making it ideal for outdoor machinery, lawnmowers, and equipment.

8. How long does it take to dry?

Drying time depends on temperature and humidity, but the fast-drying formula allows for quick application and minimal downtime. Multiple light coats are recommended for best results.

9. How should I store the aerosol?

• Store in a cool, well-ventilated place, away from direct sunlight or heat.
• After use, invert the can and spray for 2 seconds to prevent nozzle blockage.
• Keep out of reach of children.

10. What common mistakes should I avoid?

• Spraying on dirty, greasy, or wet surfaces — clean thoroughly first.
• Applying thick coats — multiple thin coats give a more even, durable finish.
• Skipping primer — for bare metal, priming enhances adhesion and longevity.
• Ignoring nozzle clearing — failing to clear the nozzle after use may cause blockages.

Step 1 – Start With a Cool Surface

Apply only to a cool, dry surface.

Do not spray:

• Hot engines
• Exhausts
• Recently operated machinery
• Surfaces close to ignition sources

Step 2 – Clean Thoroughly

Remove:

• Dirt
• Grass residue
• Oil
• Grease
• Fuel contamination
• Mud
• Wax
• Silicone
• Dust

A clean surface is essential for good adhesion.

Step 3 – Remove Loose Paint & Rust

Use:

• Steel wool
• Wire brush
• Abrasive paper

to remove:

• Flaking paint
• Loose rust
• Corrosion scale
• Poorly adhering coatings

Step 4 – Sand & Key

Lightly abrade existing sound coatings to create a good mechanical key.

Feather damaged paint edges where required.

Step 5 – Prime for Best Results

The current Jenolite instructions recommend a primed surface for optimum adhesion and durability.

Primer is particularly useful on:

• Bare steel
• Bare metal
• Repaired areas
• Difficult substrates

On plastic components, use an appropriate compatible plastic primer where required.

Step 6 – Shake Thoroughly

Shake the aerosol until the agitator ball can be heard rattling freely.

Continue shaking periodically during application.

Step 7 – Spray From 15–30cm

Hold the aerosol approximately:

15–30CM

from the surface.

Use smooth, overlapping passes.

Step 8 – Apply Multiple Thin Coats

Build coverage using:

THIN, LIGHT, EVEN COATS

rather than one heavy wet coat.

This reduces the risk of:

• Runs
• Sags
• Uneven colour
• Extended drying

Step 9 – Allow Each Coat to Dry

Allow adequate drying between coats.

Step 10 – Allow to Fully Cure Before Use

Do not put machinery straight back into heavy service while the paint is still soft.

Allow the coating to cure thoroughly before:

• Fuel exposure
• Heavy handling
• Grass or soil contact
• Washing
• Mechanical use

Step 11 – Clear the Nozzle

After use:

• Invert the aerosol
• Spray for approximately 2 seconds to help prevent nozzle blockage.