1. What is JENOLITE Directorust Gloss Spray Paint?
JENOLITE Directorust Gloss Spray Paint is an all-in-one primer, undercoat, and topcoat designed for use on multiple surfaces. It delivers a durable, high-gloss finish while actively protecting against rust and corrosion. Its advanced formula allows it to be applied directly to rust, making it ideal for both restoration and decorative projects indoors or outdoors.
2. What surfaces can I use it on?
This multi-surface spray paint can be applied directly to:
- Metal (including rusted metal)
- Wood
- Plastic
- Ceramic
- Stone
- Previously painted surfaces
Its exceptional adhesion and anti-corrosion properties make it suitable for a wide range of DIY, household, automotive, and garden applications.
3. Do I need to use a primer before painting?
No. JENOLITE Directorust Gloss Spray Paint is an all-in-one formula that acts as a primer, undercoat, and topcoat in one. It can be applied directly to rust or bare surfaces, saving you time and effort.
4. What finish does it leave?
It provides a smooth, glossy, hard-wearing finish that enhances the appearance of any surface while providing long-lasting protection from rust, moisture, and UV damage.
5. Is it suitable for exterior use?
Yes. Directorust Gloss Spray Paint is UV- and weather-resistant, making it suitable for both indoor and outdoor projects. It resists fading, cracking, and peeling when exposed to sunlight and moisture.
6. Can I use it on rusted metal?
Yes. Directorust is designed to be applied directly onto light rust without the need for a primer. It neutralises and seals rusted areas, helping to prevent further corrosion and restore the surface.
7. How do I apply the paint for the best results?
Step 1 – Surface Preparation
- Remove oil, grease, dirt, and loose paint using a suitable degreaser.
- Use steel wool or a wire brush to remove loose rust and flaky paint.
- Ensure the surface is clean and dry before application.
Step 2 – Application
- Shake the can vigorously for at least 60 seconds until the agitator ball rattles freely.
- Spray in smooth, even strokes from a distance of 15–30cm.
- Apply several light coats rather than one heavy coat for a more even finish.
Step 3 – Drying Time
- Allow approximately 15 minutes between coats.
- The surface is touch dry in around 30–45 minutes, depending on temperature and humidity.
- Allow 24 hours to fully cure before handling or exposing to harsh conditions.
8. How many coats should I apply?
For optimum coverage and durability, apply 2–3 light coats, allowing sufficient drying time between each coat.
9. What colours are available?
JENOLITE Directorust Gloss Spray Paint is available in a wide range of attractive gloss finishes, including:
- Canary Yellow
- Hunter Green
- Turquoise
- Espresso Brown
- Crimson Red
- Cardinal Red
- Cobalt Blue
- Slate Grey
- Ivory White
- White
- Black
- Charcoal
- Powder Blue
- Sage Green
10. How long does it take to dry completely?
- Touch dry: 30–45 minutes
- Recoat time: 15 minutes between coats
- Fully cured: 24 hours
Drying time may vary depending on temperature, humidity, and coating thickness.
11. Is it suitable for automotive use?
Yes, it’s ideal for automotive touch-ups and restorations, especially for metal components prone to rusting. It provides a durable, corrosion-resistant finish suitable for car bodywork, frames, brackets, wheels, and more.
12. Can I use it on plastic surfaces?
Yes. Directorust adheres well to most rigid plastics, such as PVC, ABS, and polypropylene. For best results, lightly sand glossy plastics before application to improve adhesion.
13. Can I paint over it with another product?
It’s designed as a standalone finish, so additional coatings are not necessary. However, if you wish to apply another topcoat, ensure the surface is fully cured and lightly abraded for best adhesion.
14. Is it resistant to UV and corrosion?
Yes. Directorust Gloss Spray Paint is formulated to be UV- and corrosion-resistant, making it perfect for outdoor environments and metal restoration projects. It helps prevent fading, rusting, and weather damage over time.
15. How should I store the aerosol can?
- Store in a cool, well-ventilated place, away from direct sunlight and heat sources.
- Keep temperatures below 50°C.
- After use, invert the can and spray for 2 seconds to clear the nozzle and prevent clogging.
16. What coverage can I expect from one can?
A single 400ml aerosol typically covers approximately 1.5 to 2 square metres, depending on surface texture, porosity, and application method.
17. Can I use it on previously painted surfaces?
Yes. Ensure the previous coating is stable, clean, and lightly sanded to provide a key for adhesion. Directorust can then be sprayed directly on top.
18. Is it safe to use indoors?
It should only be used in well-ventilated areas. Avoid inhaling vapour and overspray. Always wear suitable protective equipment, including gloves and a mask.
19. What temperature range should I use it in?
For best results, apply in ambient temperatures between 10°C and 25°C.
Avoid applying in damp or humid conditions or in direct sunlight.
20. Where is JENOLITE Directorust manufactured?
All JENOLITE Directorust products are Made in Great Britain, formulated using high-quality ingredients and trusted by professionals for over 80 years.
21. Typical Applications
Ideal for:
- Metal railings and gates
- Garden furniture and ornaments
- Radiators and appliances
- Bicycles, cars, and machinery
- Decorative and craft projects
- Wooden furniture, trims, and household items
