Enamel Bath Repair Spray Paint | White Gloss | 400ml | Paint & Repair Baths, Shower Trays, Kitchen Appliances

1. What is JENOLITE Enamel Bath Repair Spray Paint?

It is a high-gloss white enamel spray paint designed to repair and refresh bathroom and kitchen fixtures. Ideal for baths, shower trays, sinks, and kitchen appliances, it restores damaged surfaces with a durable, hardwearing finish.

2. Which surfaces can it be used on?

• Baths
• Shower trays
• Sinks
• Kitchen appliances

3. What kind of finish does it provide?

• Bright, glossy white finish
• Smooth, professional-looking surface
• Seamlessly blends with existing fixtures

4. Is the finish durable?

Yes. The enamel formula is hardwearing, durable, and long-lasting, able to withstand daily use and wear.

5. Can it be used to repair scratches or chips?

Absolutely. It is designed to paint over and repair scratches, chips, and minor imperfections, restoring surfaces to like-new condition.

6. How do I prepare the surface before painting?

• Ensure the surface is clean, dry, and free of grease.
• Lightly sand with grain 600 sandpaper.
• Make sure the aerosol is at room temperature.
• Shake the can for 2 minutes and test on a small area.

7. How should I apply the paint?

• Spray light coats from 25–30 cm distance.
• Shake the aerosol again before each new coat.
• Allow a minimum of 24 hours drying time between coats.
• Water resistant after 7 days.

8. How should I store and maintain the spray can?

• After use, turn the aerosol upside down and press the nozzle for about 5 seconds to clean it.
• Store in a cool, dry place, away from direct sunlight.

9. Is it safe to use?

Follow the Safety Data Sheet (SDS) for proper handling. Use in well-ventilated areas and avoid inhaling spray fumes directly.

10. What projects is it ideal for?

• Restoring and repairing baths, shower trays, sinks, and kitchen appliances
• Covering scratches, chips, or worn surfaces
• Updating home fixtures without costly replacements

11. How long does the finish last?

With proper application and curing, the enamel provides a long-lasting, durable, and water-resistant finish suitable for regular household use.

1. Before Use
Ensure the surface is clean, dry and free of grease. Slightly sand the surface (grain 600). The aerosol should be at room temperature. Shake the can for 2 minutes and spray a test sample
area.

2. Application
Apply light coats from a distance of approximately 25 to 30 centimetres. Before applying the next layer, shake the aerosol again. Drying time must be at least 24 hours. Water resistant after
7 days. The drying time depends on the ambient temperature, the humidity of the air and the thickness of the paint applied.

3. Storage & Reuse
After use, turn aerosol upside down and press the nozzle for approximately 5 seconds to clean the nozzle. Store in a cool, dry place out of direct sunlight. Consult Safety Data Sheet for more information.